ASTM 15-5PH,1.4545,X5CrNiCuNb15-5,S15500

Grades | Stainless Steels | 15-5PH,1.4545,X5CrNiCuNb15-5,S15500

ASTM 15-5PH,1.4545,X5CrNiCuNb15-5,S15500 ( Martensite )

PDF | Word | Print

15-5PH,1.4545,X5CrNiCuNb15-5,S15500 Application:High temperature alloys and other special alloys

Chemical composition(mass fraction)(wt.%) of the 15-5PH,1.4545,X5CrNiCuNb15-5,S15500
Elements Min.（≥） Max.（≤） Similar Remarks
C - 0.07
Si - 0.10
Mn - 0.70
Cr 14.50 15.50
Ni 4.5 5.5
Cu 2.5 3.20
P - 0.035
S - 0.030
Nb 0.15 0.35
N - 0.05

Mechanical properties of grade 15-5PH,1.4545,X5CrNiCuNb15-5,S15500

Yield
Rp0.2 (MPa)		 Tensile
Rm (MPa)		 Impact
KV (J)		 Elongation
A (%)		 Reduction in cross section on fracture
Z (%)		 As-Heat-Treated Condition HBW
826 (≥) 434 (≥) 41 31 22 Solution and Aging, Annealing, Ausaging, Q+T,etc 344

Physical properties of grade 15-5PH,1.4545,X5CrNiCuNb15-5,S15500

Property Density
kg/dm3		 Temperature T
°C/F		 Specific heat
J / kgK		 Thermal conductivity
W/mK		 Electric resistance
µΩ·cm
441 (≥) 435 (≥) 24 31 34 Solution and Aging, Annealing, Ausaging, Q+T,etc
Temp.
°C/°F		 Creep strain limit
(10000h)
(Rp1,0) N/mm2		 Creep rupture strength
(10000h)
(Rp1,0) N/mm2		 - - -
979 352 652 - - -

15-5PH,1.4545,X5CrNiCuNb15-5,S15500 Range of products
Product type Products Dimension Processes Deliver Status
Plates / Sheets Plates / Sheets 0.08-200mm(T)*W*L Forging, hot rolling and cold rolling Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Steel Bar Round Bar, Flat Bar, Square Bar Φ8-1200mm*L Forging, hot rolling and cold rolling, Cast Black, Rough Turning, Shot Blasting,
Coil / Strip Steel Coil /Steel Strip 0.03-16.0x1200mm Cold-Rolled & Hot-Rolled Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Pipes / Tubes Seamless Pipes/Tubes, Welded Pipes/Tubes OD:6-219mm x WT:0.5-20.0mm Hot extrusion, Cold Drawn, Welded Annealed, Solution and Aging, Q+T, ACID-WASHED