Grades | Stainless Steels | AF 1410
UNS AF 1410 ( Precipitation-Hardening )
PDF | Word | Print
AF 1410 Application:Steel Plate 2.0Cr - 10Ni - 14Co - 1.0Mo (0.13 - 0.17C) Vacuum Melted, Normalized, and Overaged
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.13 | 0.17 | ||
| Si | - | 0.10 | ||
| Mn | - | 0.10 | ||
| P | - | 0.008 | ||
| S | - | 0.005 | ||
| Ni | 9.50 | 10.50 | ||
| Cr | 1.80 | 2.20 | ||
| Al | - | 0.015 | ||
| Cu | - | - | ||
| Ti | - | 0.015 | ||
| Fe | - | - | ||
| N | - | 0.0015 | ||
| Mo | 0.90 | 1.10 | ||
| W | - | - | ||
| O | - | 0.0015 | ||
| Co | 13.50 | 14.50 |
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | HBW |
|---|---|---|---|---|---|---|
| 151 (≥) | 326 (≥) | 43 | 34 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 431 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
|---|---|---|---|---|---|
| 212 (≥) | 159 (≥) | 44 | 14 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
- | - | - |
| 555 | 526 | 939 | - | - | - |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |