Grades | Stainless Steels | XH50BMKTЮP-ИД0ЭП99-ИД)
GOST XH50BMKTЮP-ИД0ЭП99-ИД)
PDF | Word | Print
XH50BMKTЮP-ИД0ЭП99-ИД) Application:Russia GOCT standard deformation of high temperature alloy grades and chemical composition
Chemical composition(mass fraction)(wt.%) of the XH50BMKTЮP-ИД0ЭП99-ИД)
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.10 | ||
| Si | - | 0.35 | ||
| Mn | - | 0.30 | ||
| P | - | 0.015 | ||
| S | - | 0.015 | ||
| Cr | 17.50 | 19.50 | ||
| Ni | - | remaining | ||
| Mo | 3.50 | 5.50 | ||
| Al | 2.50 | 3.00 | ||
| Ti | 1.00 | 1.50 | ||
| Fe | - | 3.00 | ||
| W | 5.50 | 7.50 | ||
| Nb | - | 1.50 |
Mechanical properties of grade XH50BMKTЮP-ИД0ЭП99-ИД)
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | HBW |
|---|---|---|---|---|---|---|
| 368 (≥) | 219 (≥) | 12 | 32 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 323 |
Physical properties of grade XH50BMKTЮP-ИД0ЭП99-ИД)
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
|---|---|---|---|---|---|
| 187 (≥) | 152 (≥) | 12 | 11 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
- | - | - |
| 292 | 549 | 169 | - | - | - |
XH50BMKTЮP-ИД0ЭП99-ИД) Range of products
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |