Grades | Stainless Steels | Z11CNS17-07Az
AFNOR Z11CNS17-07Az
PDF | Word | Print
Z11CNS17-07Az Application:Stainless steels for general purposes. Plates, wide strips and strips
Chemical composition(mass fraction)(wt.%) of the Z11CNS17-07Az
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | 0.09 | 0.12 | ||
Si | 1.00 | 1.50 | ||
Mn | 1.00 | 1.50 | ||
P | - | 0.040 | ||
S | - | 0.015 | ||
Cr | 16.50 | 18.50 | ||
Mo | - | - | ||
Ni | 6.00 | 8.00 | ||
N | 0.04 | 0.08 |
Mechanical properties of grade Z11CNS17-07Az
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | HBW |
---|---|---|---|---|---|---|
241 (≥) | 987 (≥) | 44 | 22 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 214 |
Physical properties of grade Z11CNS17-07Az
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
---|---|---|---|---|---|
576 (≥) | 516 (≥) | 23 | 21 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
- | - | - |
884 | 713 | 567 | - | - | - |
Z11CNS17-07Az Range of products
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |