DIN X2CrNiMo17-13-2

Grades | Stainless Steels | X2CrNiMo17-13-2

DIN X2CrNiMo17-13-2 ( Austenite )

PDF | Word | Print

X2CrNiMo17-13-2 Application:DIN 1654-5 (1989) Cold heading and cold extruding steels; technical delivery conditions for stainless steels; Replaced by DIN EN 10263-5:2002

Chemical composition(mass fraction)(wt.%) of the X2CrNiMo17-13-2
Elements Min.（≥） Max.（≤） Similar Remarks
C - 0.07
Si - 1.00
Mn - 2.00
P - 0.045
S - 0.015
Cr 16.5 18.5
Mo 2.00 2.50
Ni 10.0 13.0
N - 0.11

Mechanical properties of grade X2CrNiMo17-13-2

Yield
Rp0.2 (MPa)		 Tensile
Rm (MPa)		 Impact
KV (J)		 Elongation
A (%)		 Reduction in cross section on fracture
Z (%)		 As-Heat-Treated Condition HBW
794 (≥) 585 (≥) 24 24 23 Solution and Aging, Annealing, Ausaging, Q+T,etc 224

Physical properties of grade X2CrNiMo17-13-2

Property Density
kg/dm3		 Temperature T
°C/F		 Specific heat
J / kgK		 Thermal conductivity
W/mK		 Electric resistance
µΩ·cm
449 (≥) 244 (≥) 41 32 23 Solution and Aging, Annealing, Ausaging, Q+T,etc
Temp.
°C/°F		 Creep strain limit
(10000h)
(Rp1,0) N/mm2		 Creep rupture strength
(10000h)
(Rp1,0) N/mm2		 - - -
995 233 252 - - -

X2CrNiMo17-13-2 Range of products
Product type Products Dimension Processes Deliver Status
Plates / Sheets Plates / Sheets 0.08-200mm(T)*W*L Forging, hot rolling and cold rolling Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Steel Bar Round Bar, Flat Bar, Square Bar Φ8-1200mm*L Forging, hot rolling and cold rolling, Cast Black, Rough Turning, Shot Blasting,
Coil / Strip Steel Coil /Steel Strip 0.03-16.0x1200mm Cold-Rolled & Hot-Rolled Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Pipes / Tubes Seamless Pipes/Tubes, Welded Pipes/Tubes OD:6-219mm x WT:0.5-20.0mm Hot extrusion, Cold Drawn, Welded Annealed, Solution and Aging, Q+T, ACID-WASHED