Grades | Stainless Steels | 16-25-6
UNS 16-25-6
PDF | Word | Print
16-25-6 Application:Special Purpose Alloys ("Superalloys")
Chemical composition(mass fraction)(wt.%) of the 16-25-6
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.5 | ||
| Si | - | - | ||
| Mn | - | 1.75 | ||
| Cr | - | 16.0 | ||
| Ni | - | 25 | ||
| Mo | - | 6.00 | ||
| Fe | - | remaining | ||
| N | - | 0.15 |
Mechanical properties of grade 16-25-6
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | HBW |
|---|---|---|---|---|---|---|
| 187 (≥) | 697 (≥) | 24 | 11 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 222 |
Physical properties of grade 16-25-6
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
|---|---|---|---|---|---|
| 981 (≥) | 487 (≥) | 23 | 43 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
- | - | - |
| 997 | 111 | 952 | - | - | - |
16-25-6 Range of products
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |