Grades | Special Alloy | 3Cr3Mo3W2V
3Cr3Mo3W2V
3Cr3Mo3W2V Application:Alloy tool steel - hot-work die steel
Chemical composition(mass fraction)(wt.%) of the 3Cr3Mo3W2V
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | V(%) | W(%) | Cu(%) |
|---|---|---|---|---|---|---|---|---|---|---|
| 0.32～0.42 | 0.60～0.90 | ≤0.65 | ≤0.030 | ≤0.030 | 2.80～3.30 | ≤0.20 | 2.50～3.00 | 0.80～1.20 | 1.20～1.80 | ≤0.30 |
Mechanical properties of grade 3Cr3Mo3W2V
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | HBW |
|---|---|---|---|---|---|---|
| 117 (≥) | 521 (≥) | 31 | 42 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 311 |
Physical properties of grade 3Cr3Mo3W2V
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
|---|---|---|---|---|---|
| 839 (≥) | 612 (≥) | 13 | 22 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
- | - | - |
| 914 | 215 | 969 | - | - | - |
3Cr3Mo3W2V Range of products
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |