Grades | Special Alloy | Z4CT17
AFNOR Z4CT17
Z4CT17 Application:Stainless Steel Plate & Steel Strip
Chemical composition(mass fraction)(wt.%) of the Z4CT17
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ti(%) |
|---|---|---|---|---|---|---|
| Max 0.04 | Max 0.75 | Max 0.08 | Max 0.030 | Max 0.015 | 16.0-18.0 | 4x(C+N)+0.20 Max 0.75 |
Mechanical properties of grade Z4CT17
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | HBW |
|---|---|---|---|---|---|---|
| 663 (≥) | 294 (≥) | 21 | 44 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 142 |
Physical properties of grade Z4CT17
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
|---|---|---|---|---|---|
| 946 (≥) | 863 (≥) | 11 | 23 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
- | - | - |
| 129 | 144 | 797 | - | - | - |
Z4CT17 Range of products
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |