Grades | Stainless Steels | X12CrMnNiN17-7-5, 1.4372,AISI 201, 1H17N4G9
EN X12CrMnNiN17-7-5, 1.4372,AISI 201, 1H17N4G9 ( Austenite )
PDF | Word | Print
X12CrMnNiN17-7-5, 1.4372,AISI 201, 1H17N4G9 Application:X12CrMnNiN17-7-5, 1.4372,AISI 201, 1H17N4G9 is used for household appliances (pots, trays, sinks, washing machines, refrigerators), dairy equipment (tanks, vats, pasteurizers, centrifuges), brewery equipment (fermentation tanks, barrels), catering equipme
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.015 | ||
| Si | - | 1.00 | ||
| Mn | 5.50 | 7.50 | ||
| P | - | 0.045 | ||
| S | - | 0.015 | ||
| Cr | 16.00 | 18.00 | ||
| Mo | - | - | ||
| Ni | 3.50 | 5.50 | ||
| N | 0.05 | 0.25 |
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | HBW |
|---|---|---|---|---|---|---|
| 176 (≥) | 166 (≥) | 31 | 22 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 142 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
|---|---|---|---|---|---|
| 449 (≥) | 236 (≥) | 14 | 12 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
- | - | - |
| 299 | 524 | 833 | - | - | - |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |